Rest in the gazebo is often disturbed by gusts of wind or rain. It is impossible to influence the vagaries of the weather, but it is possible and even necessary to protect yourself from its consequences!

Hiding in the gazebo, you will once again experience the comfort and buzz from summer pastime.

idea for a gazebo

This publication will list all known ways to protect the gazebo from rain and wind.

Some of the proposed options will only partially shelter you from the weather, while the rest will create an absolutely comfortable atmosphere indoors.

PVC film

Closing window openings with help will completely hide from wind and rain. The cost of such glazing will be cheap compared to massive double-glazed windows and euro windows, but the efficiency is very high.

The main thing is to aesthetically and accurately attach the film to the gazebo. This can be done using special fasteners or regular staples for a stapler.

Plastic Eurowindow

The most reliable way would be to install plastic euro windows.

This option refers to the warm type of glazing, which is why you can not only hide from rain and wind, but also create inside comfortable temperature using heaters.

Read more about this approach to relaxation in publications about and gazebos.

Frameless glazing

Actually, this is more for summer holidays, when it is necessary to close from gusts of wind and a drop of rain. In the cold season, this is not so interesting due to the fact that this method belongs to the cold type of glazing.

Curtains (tarpaulin, fabric)

If your building is of an open type, then installing any windows causes certain difficulties.

AT this case you can use massive ones that will partially protect people in the gazebo from the weather.

It is best to give preference to heavy and dense fabrics like tarpaulins. It will be necessary to think over the fastening not only on the eaves, but also on the supporting pillars.

Only by pulling the fabric tightly, you will be able to achieve at least something in terms of protection, otherwise, apart from discomfort and “exposed” nerves, you will not get anything.

Mosquito net (fun!)

I saw this approach with Dmitry Maltsev, who built his own. It will protect against wind, mosquitoes, light rain and sun.

The bottom line is this:

1. Buy a cheap mosquito net roll. For example, in Leroy Merlin.
2. The entire outer area is covered with a layer of this mesh and “tightly” fastened around the perimeter.
3. The mesh holds back light rain, wind, and also creates darkness in the room.

The idea is really working, even if it does not completely solve the issue of protection. It's definitely worth taking note of.

Structural elements

Decorative crate

AT recent times almost all gazebos are sold with. This is not only beautiful and aesthetically pleasing, but also allows you to achieve the following effects:

The grill partially holds back wind and rain.

A good atmosphere is created inside, especially with a large number of people, when such bad weather is not an obstacle to relaxation.

People inside the gazebo are not visible, but they, in turn, perfectly see everything that happens on the street. This is very convenient in those moments when you want to close yourself from other people's attentive glances.

Sheathing with polycarbonate, clapboard or boards

If the design of the building allows you to attach to yourself, then you can completely close yourself from any natural disasters.

As a sheathing, you can use polycarbonate plates, lining of any class or ordinary edged boards.

There are two finishes available:

1. "Tightly" close the walls.
2. Partially close the walls.

The second option looks more interesting, but is less effective. Rain and wind will easily pass through the skin. The first option will completely cover the gazebo, but will do it to the detriment of appearance.

"Greening" with plants

You can achieve protection for the interior decoration with the help of which create a dense "shell" of the gazebo, preventing rain, wind and sun from getting inside.

This method will be relevant only during the flowering season, when the leaves gain vitality and completely cover your rest area. The rest of the time the plants will be powerless against the elements.

How to make a fire in the rain

Seasoned travelers know that in our temperate latitudes, damp cold weather is one of the most dangerous. Therefore, it is very important to start a fire as soon as possible in order to keep warm and cook food. But in heavy weather conditions Of course, this is the hardest thing to do. Therefore, today we will talk about how to properly arrange a campfire in the rain.

When planning a hike, be sure to prepare materials for kindling, this will greatly facilitate your life in the future.

Suitable for ignition:

1. dry alcohol;
2. Cotton pads soaked in paraffin;
3. Paper;
4. Plexiglas;
5. candle stub;
6. Celluloid;
7. Plexiglass.

Gather a little bit of natural kindling when hiking, or you can carry a small bundle of dry brushwood with you. This is enough for the first time to support the fading fire.

Remember that everyone in the group should have a box of matches in waterproof packaging (in addition to the general supply) (Figure 1). Such boxes should always be carried with you, and not in a backpack, so that you can get them as quickly as possible.

There are many ways to pack matches, but it is important to decide whether to use full or incomplete sealing.

Incomplete sealing is enough to protect matches from rain, but if dropped into water, it will not help. However, this method is more convenient to use. Full sealing helps protect from moisture in any conditions, but when opened, it loses all its properties. Figure 1. Various options for packing matches for a hike

The complete one can be attributed to sealing a plastic bag with an iron, or sealing a box with paraffin. Incomplete includes the use of an unsealed bag or box sealed with electrical tape or adhesive tape. Easy to combine multiple different ways For example, put the boxes in a metal box and pack it in a bag.

Lighting a fire in wet weather

The best assistants in wet weather will be coniferous trees. Pine and spruce branches contain a resinous substance - resin, thanks to which they burn perfectly even in the rain. Before use, you need to clean the branches of the bark that absorbs moisture. Please note that softwood burns quickly and leaves little coal, so it should be used for the initial ignition, and then other types of wood can be added. Before using firewood, you need to remove the bark to get to the dry core.

Birch may be an exception. Birch bark is an excellent fire starter, giving off a lot of heat to keep the fire going even on a rainy and windy day. In wet weather, try to find dry, but not fallen trees - they accumulate less moisture and the core is more likely to not be rotten and rotten.

Use split logs and branches. They dry out faster and light up.

For the initial ignition, it is worth building a cone-shaped fire about 20 centimeters high, from fine dry wood and other easily burning materials. This design quickly flares up and allows you to dry the branches in the upper layers.

At strong wind you can't start a fire this way. In this case, you need to build a shelter around the fire from stones, branches and earth (Figure 2).

Figure 2. Earthen shelter from the wind for a fire

Ways to make a fire in the rain

When a fire pit has to be made in the rain, the first step is to find a suitable place. It will be good to find a hill where it is drier. If this fails, then it is necessary to make a platform of stones or as dry logs as possible so that the flame does not come into contact with wet ground. In addition, small gaps between the logs will give additional air flow for ignition.

It is important to protect the fireplace from moisture, not only from below, but also from above. Make a canopy of stretched polyethylene or coniferous branches (Figure 3), as a last resort, ask to hold a jacket over you while you work on the hearth. After the fire flares up, he will not be afraid of drizzle.

Figure 3. Options for a canopy for a fire

We act according to the same principle as usual: we collect small flammable material, the middle wood and the main wood, which before that will have to be cleaned of bark. All found logs and kindling must be covered with something until the moment of ignition.

For kindling, small dry chips, tinder, paper, dry leaves or needles, which are laid down the fire, are suitable. Next, a hut is built from thin dry brushwood and torches. Gradually add larger branches to the fire, waiting until it becomes more stable.

Be sure to kindle from below, otherwise you will simply waste time and matches.

It is much easier to kindle a flame with a candle. A piece, about one and a half centimeters high, is cut off from it, placed on the ground and set on fire. From above, a hut or a kind of taiga fire is built from thin splinter and brushwood, which should touch the top of the light, but not the wick, otherwise the candle will go out. The flame of the candle lasts for a long time, which allows the brushwood to dry out and flare up. Naturally, you should not count on the fact that you can get the stub of the candle after the fire flares up in order to use it again.

When it rains, the design of the fireplace plays an important role. Some of the structures are quickly flooded by heavy rain, such as the “well”, so it is important to arrange the logs so that they serve as a roof for the fire (Figure 4). The most suitable in such weather conditions would be a taiga bonfire (“ramp” or “roof”). To do this, other logs are superimposed on the lying log at an angle, thus forming the shape of a ramp. The main kindling is placed under such a “roof”, which helps protect it from rain.

Figure 4. In bad weather, the choice of the type of fire matters

If you do not have a suitable small kindling, you can make fire sticks. To do this, you will have to look for dead wood and break it into logs. After that, cut out splinters from them, on which you need to cut the chips with a sharp knife, but do not cut it to the end to form a whisk. This type of ignition ignites very quickly (Figure 5). It is worth preparing several of these sticks, and on the remaining branches make cuts along the entire length. Large logs are best split lengthwise, which makes the inner layers of the wood light up more easily.

Figure 5. Using fire sticks to light a fire

Thus, we see that working with a fire in the rain takes a lot of time and has many nuances. It is worth noting that you should not try to speed up the work, neglecting careful preparation. After all, it will take much more time to make repeated attempts to make an extinguished fire.

When lighting in the rain, you can use three matches at once. Stack them in a ladder and this will give you a longer burning time (Figure 6).

AT wild nature, whether it's a camping trip or a regular picnic, sometimes a situation arises that requires the organization of protection for a fire. Protect the fire mainly from rain and wind. Despite such a small number of factors dangerous for a fire, there can be a lot of options for protecting it, since it has to be covered in different conditions by different means, from special barriers to shelters made from improvised materials. And not always in such cases, a fire on an awning is an ideal solution. It happens that a homemade rain canopy or a wind wall will be more preferable and effective.

Awning from a tent as a canopy for a fire.

Campfire protection classification

Protection of the fire from adverse factors environment I divide into two main types - wind protection and rain protection.

Each of these types, in turn, is divided into natural shelters and artificial ones.

Artificial in my classification are divided into:

• made in production;
• handmade from artificial materials;
• homemade shelters from natural materials.

Wind protection

In windy weather, making a fire can be difficult.

First, the wind can blow out a burning match or lighter and prevent a person from lighting the kindling. And even kindling or brushwood that has begun to burn can be easily blown out by a strong wind.

Secondly, cooking on a fire, the flame of which is blown away by the wind, will be problematic. The zone of flame with the maximum temperature will fluctuate and spread along the ground instead of fully heating the dishes with food.

Thirdly, sparks and fragments of burning coals can be blown out of the safe area by the wind and cause a fire.

In strong winds, the flame is almost uncontrollable and it is difficult to cook food on it.

These inconveniences can be effectively eliminated with a windscreen.

Windshields available for sale

To date, the production of special equipment has been launched to protect the fire from the wind.

In free sale you can find the so-called "shield for the hearth." It is a movably interconnected metal plates that can be compactly folded and put in a backpack, and if necessary, protect the fire from the wind - unfold, getting a kind of mini-fence.

In fact, such a windscreen will only help to ignite the kindling with a match, or protect the flame of the burner from the wind.

Due to the reflective surface of the plates, the hearth shield not only protects the fire from the wind, but also serves as a kind of screen, reflecting infrared (thermal) radiation and thereby increasing the efficiency of the fire.

The dimensions of each cell of the shield that I saw for sale are only 135mm by 75mm. Such a shield can only protect a small fire or a burner flame from the wind.

The cost of such a product ranges from twenty US dollars.

As for me, for hiking trips in which it is planned to burn fires, this product is unsuitable because of its small size.

Also, for protection from the wind, some equipment that was originally intended for other tasks will fit perfectly. For example, a carimat (tourist rug), designed to protect a person lying on the ground from the cold, can be effectively used as a windscreen. To do this, the carimate is twisted into a wide pipe and placed on the ground so that the fire is in the middle.

Karimat will have to be held with his hands, otherwise the wind will overturn him on the fire. However, several pairs of thick sticks, driven into the ground at some distance from each other and capable of withstanding the pressure of the wind, taking into account the area of ​​\u200b\u200bthe karimat, will free their hands, becoming the backbone on which the impromptu shield will be held.

At worst, you can use a backpack as a windscreen, putting it on the windward side of the fire, or any other equipment at hand.

Boat as an effective wind protection.

But what if there was nothing suitable for organizing wind protection from the equipment? In this case, you can try to make a windscreen from natural materials.

Windshields from improvised natural materials

If there was no ready-made windscreen at hand, first you should look for a suitable place for a fire. In windy weather, it makes sense to kindle a fire behind natural shelters, such as a rock, a large boulder, a thick tree (subject to fire safety rules).

Also, when choosing a place for a fire, you need to remember that the wind, as a rule, is weaker in a ravine than at the top of a slope, and weaker in a forest than in open areas: vegetation and relief folds themselves are protection from moving air masses.

A well-chosen place, reliably protected from the wind, will save time and effort on the manufacture of a windscreen and reduce the cooling of the body (ceteris paribus, hypothermia occurs faster in the wind), which is important for the cold season.

If, nevertheless, the parking lot is far from ideal, and the wind does not let up, you will have to build a shelter from improvised materials.

So, for example, reliable wind protection for a fire can be made from wooden poles (for example, from young pine deadwood). To do this, two pairs of poles are driven into the ground, and the remaining poles or brushwood are placed between them perpendicular to the wind in a horizontal plane - a fence is obtained. The cracks in such a fence can be covered with wet clay.

Shelter and windscreen rolled into one

In windy weather, you can kindle a fire in a pit. The walls of the pit themselves provide protection from the wind and do not allow air currents to extinguish the flame.

A wall that protects the fire from the wind can be made of turf. To do this, the turf is cut in the form of bricks and folded in the same way as brick buildings.

AT highlands, where it will not work to dig a hole or stick poles into the ground, a pile of stones laid in a semicircle can save a fire from the wind. If you have stones of a suitable shape, you can even make some kind of furnace out of them.

A homemade mini-oven can also be molded from clay. But before you put a pot on such an oven, the clay will have to be burned to harden it.

In principle, even the human body can act as a windbreaker. This is clearly seen in the example of lighting a match in a strong wind: before lighting a match, a person turns his back to the wind and only after that strikes a match on the box.

It should be noted that some fires do not require wind protection if the wind is unidirectional and does not change over time. Such fires include a node and a hunting fire. If the wind constantly changes its direction, you can make a fire called "Finnish candle". In such bonfires, the fuel itself is the protection of the flame from the wind.

Such a fire is not afraid of any wind, although its manufacture is not an easy task.

Many of the described wind protection options, except for fires in a pit and some variants of specialized fires (the same Finnish candle), make it possible to increase the effectiveness of a fire as a heater, since they reflect heat onto a person in front of the fire.

Fire protection from precipitation

Water is the main enemy of fire. Wet firewood is difficult to kindle, and heavy rain can put out almost any fire, although there are exceptions to this rule, but about them a little later.

To reliably protect the fire from moisture, you need to use shelters, which are both anthropogenic and natural origin. Consider the main options.

Awnings for a fire

Recently, awnings from the rain have become widespread among tourists and other outdoor enthusiasts.

Their variety is such that everyone can choose the awning that best suits their requirements.

A very comfortable and functional awning, which, however, is not suitable for hiking due to its size and weight.

The production produces awnings of various sizes that can cover not only the fire from precipitation, but also a group of people located around it. Typically, the dimensions of the sides of such awnings range from 3-5 meters.

The size of the awning can also matter if it is supposed to be used as a tent. In any case, a square tent with a side of at least 3 meters is enough for a group of two people.

Awnings differ in water resistance. Some are able to save only from drizzling rain, others allow you to feel confident even with prolonged downpours. This value is measured in millimeters of water column. In order to stay dry in the pouring rain, you need to use an awning with a water resistance of at least 3000 mm.

No less important is the resistance of the material of the awning, which is supposed to cover the fire, to high temperatures. Special awnings designed for fires do not deform even if their fabric is on fire for a while, while simple awnings can catch fire even from sparks flying out of a fire.

If you have to burn a fire under an awning that is not intended for this, the awning should be pulled as high as possible above the fire, and the fire itself should be made so that neither flames, nor sparks, nor temperature can damage the fabric of the awning.

The photo below shows the situation when the fire is too close to the tent - even if in most cases nothing bad happens, even a minimal risk of making a hole in the tent is the basis for some displacement of the fire to the side:

Usually the fabric of the awning is made resistant to high loads and damage, but here everything is individual.

An important characteristic of the tent is its weight, because the tourist will have to carry all his equipment on his own back. The mass of most awnings fluctuates within a kilogram or two. There are also special awnings for light-footed tourists, the weight of which is within a few tens of grams, but they are, as a rule, the least resistant to sparks, moisture, and wind.

Prices for different awnings vary greatly, depending on the characteristics, sizes and manufacturers, and fluctuate on average within the range of 50-150 US dollars. Although of course you can find awnings and cheaper.

The photo shows a universal awning to protect the fire from wind and rain:

On the contrary, "light-moving" awnings are very expensive - their price can exceed 300 USD.

Most often, the awning is stretched between the trees so that water can drain freely from it, without accumulating in the deflection of the fabric. If the water does not have the opportunity to drain, its mass can reach critical values ​​\u200b\u200band the ropes or the awning itself will break.

An alternative to an awning

If there is not enough money for an awning, a piece of polyethylene can be used instead. Polyethylene, although less durable, is not so convenient to handle, but it is usually much lighter than an awning (except, perhaps, for easy-moving awnings) and an order of magnitude cheaper.

It is recommended to tie polyethylene to a rope with a blind loop or a stirrup knot, and so that the polyethylene does not slip out, a smooth rounded pebble or bump is first wrapped in it. I once used burdock baskets molded into a ball for these purposes: they are softer and during gusts of wind they partially absorb the jerk, protecting the polyethylene from tearing.

In extreme cases, when there is no time to search for stones and mugs, you can do it even easier: tie polyethylene to a rope using a “boa constrictor” knot. The polyethylene well clamped with this knot does not slip out, unless, in parallel with the rain, such an impromptu awning is not torn off the rope by the wind.

The video below shows a rather complex tent made of polyethylene:

Having invented and tested a few years ago this option for attaching a rope to polyethylene, now I always use only it. The main disadvantage of this method is the difficulty of untying the knot after use. But these are trifles.

If neither an awning nor a piece of polyethylene were included in the items taken on a hike, a canopy can be made from a large garbage bag cut along the length, which is often used as an airtight liner in a backpack to protect things from moisture. But in this case, you need to weigh the pros and cons so as not to be at the fire, but with a backpack full of wet things.

In the old days, instead of an awning, a tarpaulin raincoat could be used, which, if necessary, could be easily transformed from a cape into an effective protection of a fire from rain. Although, as far as I can tell, raincoats are still quite popular today, especially among former military personnel.

As a mini-tent, a “space blanket” will do. It is strong, light and very compact. Its disadvantages include perhaps a small size and a lot of noise generated when used in the wind.

To protect the fire from the rain are also used various options tents, sheds and other stationary structures, but these are more options for urban and suburban conditions than for tourism and survival conditions, so we will not consider them within the framework of this article.

If a person is left with what is called with bare hands in the middle of a forest or other wilderness, then you need to know how to build a shelter from improvised materials.

Rain shelter made from natural materials

As in the case of protecting the fire from the wind, here, first of all, you should choose the optimal place for making a fire. The best in this regard will be places hidden from precipitation, for example, a platform under overhanging rocks or at the entrance to a cave. For example, the photo below shows a campsite of tourists with a fire in one of the "caves" on Mount Mangup in Crimea:

Not the most the best option in this regard, there is a place under a large tree with a lush crown: although it covers the fire from precipitation, it can cause a fire or electric shock to a person during a thunderstorm. If we are talking about winter period, then a hat of snow heated by the heat of a fire can fall from a branch and put out the fire.

If the chosen place does not provide protection from precipitation, you need to build a shelter from natural materials. Reliable protection from rain and fire safety are two criteria by which the chosen type of shelter should be evaluated before you start building it.

A good shelter is obtained from flat poles laid on a horizontal bar, located at some distance from the ground, covered with moss on top. The poles should lie close to each other at an angle of at least 45 degrees with respect to the ground. If the angle is smaller, rainwater will drip from the poles directly into the fire, which is not very good. Also, as a prevention of leakage, all knots, branches and protruding pieces of bark on the lower surface of the poles should be removed.

An example of such a shelter is shown in the video by Grigory Sokolov:

Instead of moss, branches with foliage or spruce branches can be used, and these materials are laid from the bottom up according to the tile principle to reduce the likelihood of water penetrating through the structure. In this option, you need to carefully monitor the fire so that the fire does not spread to the flammable materials of the shelter.

A small fire can also be built under a similar type of shelter, in which sticks are laid on the trunk of a fallen tree.

It would not be superfluous to talk about fires that are resistant to rain and snow.

The main thing to pay attention to when deciding how to make a fire in wet weather is right choice places. It is advisable to find an elevated and more or less dry area. But if this fails, then it is necessary to make a flooring of stones or logs to isolate the fire from the damp earth.

In principle, you can lay down a fire even in a swamp. For example, like this: take 4 rogulins, stick them into the ground and build a platform on them for a future fire. The platform can also be made floating in the form of a raft, consisting of a couple of thick logs connected to each other with wire.

After the problem of moisture coming from below is solved, care must be taken to protect the fire from moisture falling from above.

The most reliable in this case will be the manufacture of a canopy over the fire. The canopy can be made from a piece of plastic wrap or improvised materials. If there is nothing at all, then the fire from the rain must be covered with your own body until it comes into force.

Spreading a fire in wet weather is of the “taiga” type, when other logs are leaning against a log lying on a platform, forming the shape of a slope (by the way, in many sources, a “taiga” fire is called a “ramp” or “roof”).

Under the roof of such a fire, an ignition fire is kindled. You can take birch bark for kindling (it burns well, even when wet). To do this, a piece of birch bark is rolled into a tube, and thin strips torn from another piece of birch bark are placed inside. The outer shell of such birch bark kindling will protect well inner part from the rain until it flares up properly.

If you are unlucky and there is no easily procured birch bark in the area, then kindling will have to be obtained from the middle of the dead wood. If it has been raining for a long time, then before cutting down a dead tree, pay attention to its top. If the top is missing, then most likely the wood inside is wet and rotten. Chop the one whose top is intact.

Having cut a suitable dead wood into logs, cut a thin splinter from the middle and “fluff” it, cutting the chips on one side. This will give you a high grade of kindling called a fire stick. If the weather is not very wet, then such an “incendiary” splinter can be made from broken off dry knots, and without getting it out of the middle.

An important rule when making a fire in the rain is that you need to work with kindling and pilot fire with dry hands. Dry them on your clothes or tuck them under your arms. Also, make sure that no water drips from your hair.

Lighting a fire in the rain is best done using three matches at once. Lay them down with a ladder. Then, igniting sequentially one after another, they will give a longer heat.

You will make your task much easier if you have dry fuel, a piece of Plexiglas or a candle in your survival kit. These items will help to dry the kindling faster and light the fire.

Some useful tips:

In the rain, firewood and kindling are harvested 2-3 times more than under normal conditions;

It is necessary to use gasoline or alcohol to kindle a fire by soaking a piece of cloth folded into a bundle, which is subsequently used as kindling. Flammable and explosive substances must not be poured into the fire.

When using false fires, kindling is also set on fire, and not wet firewood. If the false fire is long-playing (10 minutes), then firewood can also be set on fire, only it is advisable to pre-cut them, having cut more chips. It is necessary to keep a false fire along the logs so that the flame covers the largest surface;

Wet firewood is dried in the process of burning a fire. To do this, they are laid side by side or placed, piled on one side of the fire bar.

> wilderness survival > how to build a fire in the rain

Sometimes, in order to involuntarily start a fire, it is enough to throw an unextinguished cigarette in the forest or forget to turn off the iron. And here you are, forest fires are blazing or residential buildings are burning. But I often had to see how people dry clear weather they try to make a fire from dry firewood in order to cook a barbecue and they don’t succeed without ignition, or even gasoline)) Either the hands are not from the right place, or there is not even the smallest knowledge about how to make a fire correctly . And if you have to make a fire in the rain or in wet weather, then such "craftsmen" completely despair. Now we will analyze how to properly light a fire in wet weather.

Lighting a fire in wet weather

Look for coniferous trees. Sprigs of pine, spruce are perfect for lighting a fire in the rain. The fact is that coniferous trees contain resin - resin. It burns well even in high humidity. Before using such firewood, separate the bark, as it absorbs moisture, but at the same time protects the wood itself from getting wet. Coniferous wood burns out pretty quickly, leaving almost no coal, so in addition to needles, you need to take other types of trees. Just before you put the branches of deciduous trees in the fire, remove the bark, there is too much moisture in it. The exception is birch. Birch bark - birch bark can not be removed, but on the contrary, it can be removed and used to light a fire. Birch bark contains resins and burns very well, while releasing a large amount of heat, sufficient to start a fire even in rainy and windy weather. When lighting a fire, especially in wet weather, look for dry, not downed trees. Such trees get wet less when it rains and are more likely to have dense, rather than rotten and rotten wood.

When kindling a fire, try to use not whole, but split logs and twigs along the length. These burn faster and more efficiently.

In any weather (with the exception of a strong wind), for the initial ignition, make the shape of a fire in a cone about 20-30 centimeters high from small dry twigs and other quickly kindled material. The shape of the cone allows the heat to spread quickly and at the same time dry the upper layers of the branches, leading to a better kindling of the fire. With a weak breeze, it should be set on fire from the windward side so that the wind fanned the fire. But if the wind is strong, it will not work to kindle a fire in this way. In a strong wind, you should dig a small hole (unless, of course, this is permissible and the hole does not fill with water) or build a shelter around the fire from stones, earth or branches that will protect the future fire from the wind.

If you have to kindle a fire right in the rain, make a canopy from spruce branches. When the fire flares up well, a little rain will no longer be terrible for him.
Using a fire starter in damp weather will of course make it easier to start a fire. Dry alcohol tablets, lighter gels, cotton balls, tinder, pieces of clothing, or old wipes can save lives when the weather turns bad.
All the most flammable objects and small dry firewood, tinder must be laid down the fire and set on fire from below. Trying to light a fire from above or from the middle is a waste of time and effort. Tinder is a dry, dead plant material that makes it easier to start a fire. kindling core
must be filled with tinder. I advise you to keep a supply of tinder on hand, this can save an dying fire or help when building a fire in the future.

An anthill can be used to light a fire in the rain or in winter. Just don’t be cattle, don’t burn a whole active anthill. In winter, you can safely take the upper part of the anthill. it's still empty. And in the summer or in the season when the ants are still in it, take the amount of dry brushwood from the anthill strictly necessary for ignition so as not to spoil the entire anthill. The brushwood in the anthill is always dry, even in the rain.